BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller

Price: $33.98
(as of Feb 18, 2024 06:55:25 UTC – Details)

Product Description

BN-880 GPS Module

Features:

GPS Module,Dual Module Compass

With electronic compass IC HMC5883L

1.25mm spacing between the 6pins patch seat

Note:

Can not use for flight control with SCM, but it is suitable for Open source flight controller.

GPS Program Set up documents and instructions:Please click here BN-880 GPS Configuration files

Package Included:

1 x BN-880 GPS Module

1 x 15cm 6pin 1.25mm connector cable

1 x 6P Dupont Cable 1.25mm Pitch Male

1 x 6P Dupont Cable 1.25mm Pitch Female

NMEA message output sample

GNRMC,073114.00,A,2237.56240,N,11401.59614,E,1.329,21.11,020916,,,A,V*37

GNVTG,21.11,T,,M,1.329,N,2.462,K,A*1B

GNGGA,073114.00,2237.56240,N,11401.59614,E,1,12,0.78,112.9,M,-2.5,M,,*54

GNGSA,A,3,19,05,02,06,17,12,09,13,,,,,1.48,0.78,1.26,1*01

GNGSA,A,3,69,83,84,70,68,82,,,,,,,1.48,0.78,1.26,2*0E

GPGSV,4,1,13,02,46,340,36,05,52,254,37,06,42,041,41,09,22,053,40,0*6E

GPGSV,4,2,13,12,32,282,35,13,13,185,33,17,36,131,37,19,57,119,44,0*66

GPGSV,4,3,13,20,03,237,,23,00,038,,25,09,311,19,42,51,128,32,0*60

GPGSV,4,4,13,50,46,123,33,0*50

GLGSV,2,1,08,68,25,027,39,69,78,011,36,70,40,213,43,74,00,259,,0*78

GLGSV,2,2,08,82,06,124,36,83,46,085,44,84,44,358,41,85,05,324,14,0*74

GNGLL,2237.56240,N,11401.59614,E,073114.00,A,A*7C

BN 880 GPS connection to flight controller

VCC to 5V

RX to TX3

TX to RX3

GND to G

BN-880 GPS for Aircraft Pixhawk Betaflight Flight Control

BN-880 GPS for Aircraft Pixhawk Betaflight Flight Control

BN 880 GPS connection to sensor

VCC to 5V

RX to D4

TX to D3

GND to GND

Product parameters:

Chipset: 8th Power Supply: DC Voltage 2.8V~6.0V,Typical:3.3V or 5.0V Consumption: Capture 50mA@5V Receiving Format: GPS, GLONASS,Galileo,BeiDou,QZSS and SBAS Receiving Channel: 72 Searching Channel Receiving Sensitivity: Trace -167dBm , Capture-148dBm Positioning Time: Cold Start: avg26s , Warm Start: avg25s, Hot Start: avg3s Level Positioning Precision: 2m At Open Wind Output Frequency: 1Hz-10Hz,Default 1Hz Speed Precision: 0.1 m/s (Without Aid) Acceleration Precision: 0.1 m/s (Without Aid) Dynamic Characteristics: Max Height:18000m, Max Speed:5153m/s,Max Acceleration:4G UART Interface: UART Port:TXDA and RXDA Support Rate: 4800bps to 115200bps,Default 38400dps Temperature Working Temperature:-40℃-+85℃, Storage Temperature:-40℃-+85℃ The Module’s Pins: SDA,GND,TX,RX,VCC,SCL

Compass
No No HMC5883L HMC5883L

Flash
No 4M Flash 4M Flash 4M Flash

Antenna Type
Passive Passive Passive Active

Defaut Working Mode
GPS+GLONASS GPS+GLONASS GPS+GLONASS GPS+GLONASS

Voltage
3.6-5.5V 3.6-5.5V 3.6-5.5V 3.6-5.5V

Default Baudrate
9600 9600 9600 9600

Frequency Range
1-10HZ 1-10HZ 1-10HZ 1-10HZ

Output
TTL TTL TTL TTL

Pin Header
GND,TX,RX,VCC GND,TX,RX,VCC SDA,GND,TX,RX,VCC,SCL SDA,GND,TX,RX,VCC,SCL

Connector
1.0mm pitch 4P 1.0mm pitch 4P 1.25mm pitch 6P 1.25mm pitch 6P

GPS Modules Comparison

BN-180 GPS Module Size: 18*18*6mm

BN-220 GPS Module Size: 22*20*6mm

BN-880 GPS Module Size: 28*28*10mm

BN-800 GPS Module Size: 35*35*6mm

Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L
Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it
DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
When you use it for Raspberry Pi, there is no driver needed but you need to install software